Patterned steel
Finishing reveals the contrast between the layers. The lines can shift and curve differently from blade to blade.
Explore patterned blades in everyday folding and fixed-blade designs. Compare blade lengths, handle materials, and details to find the right fit.
Finishing reveals the contrast between the layers. The lines can shift and curve differently from blade to blade.
Steel choice, heat treatment and edge geometry all affect how a blade cuts. Check the specifications for the knife you’re considering.
Pick the feel you prefer, from a textured G10 scale to visible wood grain and an engraved bolster.
Compare three folders and one fixed blade from TOSAHWI.
Four stages of a typical pattern-welded blade, from preparing the steel to revealing the finished layers.
Strips of contrasting steel are cleaned and stacked into a billet for welding.
Heat and pressure bond the stack into a single piece.
The billet is drawn out and shaped. Grinding gives the blade its profile, and heat treatment sets the steel’s properties.
Etching reveals contrast between the layers. The edge is then finished and inspected.
Start with the tasks you have in mind, then compare the blade, construction and grip.
Remove moisture and residue with a soft cloth. Wash the blade by hand if needed.
Dry the blade completely before closing a folder or putting a fixed blade back in its sheath.
If your model calls for it, apply a light coat of suitable blade oil and wipe off the excess.
Follow the model’s sharpening guidance and keep abrasive tools off the patterned blade face.
Many modern Damascus blades use layers of different steels joined by pattern welding. The layers take on different tones when etched. Construction and alloy choice vary by model.
The photos show the design and finish. The position of the lines and their contrast may vary on the blade you receive.
For daily carry, compare blade length, grip and closed size on each folder’s product page. Consider the fixed blade if you prefer a longer blade and rigid construction.
Corrosion resistance depends on the alloys used. Clean the blade after exposure to moisture or residue, dry it fully and follow the storage guidance for your model.
Use an appropriate sharpening stone or guided system and maintain the factory edge angle. Work on the edge bevel and keep abrasives off the blade face. For service options, see our warranty and sharpening page.
You can request a change-of-mind return on eligible direct purchases within 60 days of purchase. Items must be unopened and unused in the original packaging. Our limited warranty covers qualifying defects. See the return policy and warranty terms for full conditions.
See the current Damascus lineup, prices and availability.